[View with PicLens]

 

OES 2010 G10 CNC Single Fin
Designed both for our Xwave and Wave Pro boards to be used in both On shore and Cross off condition.The design had a shorter core lenght for less drag and greater speed with the same thickness foil for better holding power and better upwind performance. The tip has been squared off again for less drag and better safety from fin cuts.
Available in
Power Box 11”/28cm, 10”/25cm, 9”/ 23cm
US box 9”/23cm, 8.75”/22cm, 8.5”/21.5cm, 8.25”/ 21cm, 8”/ 20cm, 7.75”/ 19cm

OES 2010 G10 CNC 17cm , 16cm, 15cm Twin Fins Standard foils
These new twin fin have been tested over this Australia summer for our larger TF 105, TF 95 , TF 90 and TF85 twin fins. They had slighty thicker foils and more area in the base and are deeper at 17cm to help hold these bigger tail boards better without causing too much drag.
Available in US Box 17cm and 16cm

OES 2010 G10 CNC 16cm and 15cm finer Foil
These are smaller and thinner foiled twin fins for maxium speed, Super short core lenght and finer foil cut the drag down to be only just slower then a single singe wave board but with tighter turns on the wave face.
Available in US box 16cm and 15cm

OES G10 CNC Quad Fins   13cm Back Fin/ 6.5cm Front Fin  .

These thin foil quad fin are design to give maxium grip without causing too much drag with thicker foil and having too much depth. Available in US boxes

25cm Xwave G10 CNC Fin
28 cm XR Freeride G10 fin